SGI Fuel
    R14000 600Mhz 4Mb cache
    1024Mb memory
    2x 18Gb U160 scsi disk
    Odyssey V10 graphic option
    Creative Sound Blaster Audigy audio card
    Irix 6.5.30
    hostname Drina

root@drina:/# hinv -vm
Location: /hw/module/001c01/node
            IP34 Board: barcode MRR533     part 030-1707-003 rev -H
Location: /hw/module/001c01/node/cpubus/0
        IP34PIMM Board: barcode MRS297     part 030-1730-001 rev -G
Location: /hw/module/001c01/Ibrick/xtalk/13
         ASTODYB Board: barcode MRR205     part 030-1725-001 rev -F
Location: /hw/module/001c01/Ibrick/xtalk/14
            IP34 Board: barcode MRR533     part 030-1707-003 rev -H
Location: /hw/module/001c01/Ibrick/xtalk/15
            IP34 Board: barcode MRR533     part 030-1707-003 rev -H
1 600 MHZ IP35 Processor
CPU: MIPS R14000 Processor Chip Revision: 2.3
FPU: MIPS R14010 Floating Point Chip Revision: 2.3
CPU 0 at Module 001c01/Slot 0/Slice A: 600 Mhz MIPS R14000 Processor
Chip (enabled)
  Processor revision: 2.3. Scache: Size 4 MB Speed 300 Mhz  Tap 0x1a
Main memory size: 1024 Mbytes
Instruction cache size: 32 Kbytes
Data cache size: 32 Kbytes
Secondary unified instruction/data cache size: 4 Mbytes
Memory at Module 001c01/Slot 0: 1024 MB (enabled)
  Bank 0 contains 512 MB (Standard) DIMMS (enabled)
  Bank 1 contains 512 MB (Standard) DIMMS (enabled)
Integral SCSI controller 0: Version QL12160, low voltage differential
  Disk drive: unit 1 on SCSI controller 0 (unit 1)
Integral SCSI controller 1: Version QL12160, single ended
  CDROM: unit 6 on SCSI controller 1
IOC3/IOC4 serial port: tty1
IOC3/IOC4 serial port: tty2
IOC3 parallel port: plp1
Graphics board: V10
Integral Fast Ethernet: ef0, version 1, module 001c01, pci 4
Iris Audio Processor: version EMU revision A3, number 2
  PCI Adapter ID (vendor 0x1102, device 0x0004) PCI slot 1
  PCI Adapter ID (vendor 0x1102, device 0x7003) PCI slot 1
  PCI Adapter ID (vendor 0x1102, device 0x4001) PCI slot 1
  PCI Adapter ID (vendor 0x1077, device 0x1216) PCI slot 1
  PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 4
  PCI Adapter ID (vendor 0x11c1, device 0x5802) PCI slot 5
HUB in Module 001c01/Slot 0: Revision 2 Speed 200.00 Mhz (enabled)
IP35prom in Module 001c01/Slot n0: Revision 6.136
USB controller: type OHCI

root@drina:/# ./gfxinfo
Graphics board 0 is "ODYSSEY" graphics.
        Managed (":0.0") 1280x1024
        BUZZ version B.1
        PB&J version 1
        32MB memory
                Banks: 2, CAS latency: 3
         Monitor 0 type: SAM 286
        Channel 0:
         Origin = (0,0)
         Video Output: 1280 pixels, 1024 lines, 60.00Hz (1280x1024_60)

SGI Onyx IR
    4x R10000 195Mhz 1Mb cache
    2048Mb memory
    9Gb scsi disk internal (single ended)
    4x 4.5Gb scsi disk external (differential)
    Infinite Reality graphics option with dg4-2 (two video channel) and two RM6-64 (64Mb texture memory, 160Mb buffer memory)
    Irix 6.5.22f
    hostname Neretva

root@Neretva:/# hinv
CPU Board at Slot 2: (Enabled)
  Processor 0 at Slot 2/Slice 0: 194 Mhz R10000 with 1 MB secondary cache (Enabled)
  Processor 1 at Slot 2/Slice 1: 194 Mhz R10000 with 1 MB secondary cache (Enabled)
  Processor 2 at Slot 2/Slice 2: 194 Mhz R10000 with 1 MB secondary cache (Enabled)
  Processor 3 at Slot 2/Slice 3: 194 Mhz R10000 with 1 MB secondary cache (Enabled)
CPU: MIPS R10000 Processor Chip Revision: 2.5
FPU: MIPS R10010 Floating Point Chip Revision: 0.0
Secondary unified instruction/data cache size: 1 Mbyte
Data cache size: 32 Kbytes
Instruction cache size: 32 Kbytes
Main memory size: 2048 Mbytes, 2-way interleaved
MC3 Memory Board at Slot 1: 2048 MB of memory (Enabled)
  Bank A contains 64 MB SIMMS (Enabled)
  Bank B contains 64 MB SIMMS (Enabled)
  Bank C contains 64 MB SIMMS (Enabled)
  Bank D contains 64 MB SIMMS (Enabled)
  Bank E contains 64 MB SIMMS (Enabled)
  Bank F contains 64 MB SIMMS (Enabled)
  Bank G contains 64 MB SIMMS (Enabled)
  Bank H contains 64 MB SIMMS (Enabled)
I/O board, Ebus slot 3: IO4 revision 1
Integral EPC serial ports: 4
Graphics board: InfiniteReality (config 0x00000003)
Integral Ethernet controller: et0, Ebus slot 3
EPC external interrupts
Integral SCSI controller 1: Version WD33C95A, differential, revision 0
  Disk drive: unit 1 on SCSI controller 1
Integral SCSI controller 0: Version WD33C95A, single ended, revision 0
  Tape drive: unit 5 on SCSI controller 0: DAT
CC synchronization join counter
Integral EPC parallel port: Ebus slot 3
VME bus: adapter 0 mapped to adapter 13
VME bus: adapter 13

root@Neretva:/# /usr/gfx/gfxinfo
Graphics board 0 is "KONAS" graphics.
    Managed (":0.0") 1280x1024
    Display has 2 channels
    4 GEs (of 4), occmask = 0x0f
    4MB external BEF ram, 32bit path
    2 RM6 boards (of 2) 1/1/0/0
    Texture Memory: 64MB/64MB/-/-
    Large pixel depth
    32K cmap
    Channel 0:
     Origin = (0,0)
     Video Output: 1280 pixels, 1024 lines, 60.00Hz (1280x1024_60.vfo)
    Channel 1:
     Origin = (0,0)
     Video Output: 1280 pixels, 1024 lines, 30.00Hz (1280x1024_180qi.vfo)

SGI Onyx RE2 - sold
    2x R4400 150Mhz 1Mb cache
    256Mb memory
    2x 1,2Gb scsi disk (differential)
    Reality Engine 2 graphics option with two RM5 (16Mb texture, 80Mb video buffer)
    Irix 6.2
    hostname Drina

    root@Drina:/# hinv
        CPU Board at Slot 2: (Enabled)
          Processor 0 at Slot 2/Slice 0: 150 Mhz R4400 with 1 MB secondary cache (Enabled)
          Processor 1 at Slot 2/Slice 1: 150 Mhz R4400 with 1 MB secondary cache (Enabled)      
        CPU: MIPS R4400 Processor Chip Revision: 6.0
        FPU: MIPS R4000 Floating Point Coprocessor Revision: 0.0
        Main memory size: 256 Mbytes, 2-way interleaved
        MC3 Memory Board at Slot 1: 256 MB of memory (Enabled)
          Bank A contains 16 MB SIMMS (Enabled)
          Bank B contains 16 MB SIMMS (Enabled)
          Bank C contains 16 MB SIMMS (Enabled)
          Bank D contains 16 MB SIMMS (Enabled)
        Instruction cache size: 16 Kbytes
        Data cache size: 16 Kbytes
        Secondary unified instruction/data cache size: 1 Mbytes
        Integral SCSI controller 0: Version WD33C95A, single ended, revision 0
          Tape drive: unit 5 on SCSI controller 0: DAT
        Integral SCSI controller 1: Version WD33C95A, differential, revision 0
          Disk drive: unit 1 on SCSI controller 1 (unit 1)
          Disk drive: unit 2 on SCSI controller 1 (unit 2)     
        Integral EPC serial ports: 4
        Integral EPC parallel port: Ebus slot 3
        RealityEngineII Graphics Pipe 0 at IO Slot 3 Physical Adapter 2 (Fchip rev 2)      
        Integral Ethernet controller: et0, Ebus slot 3
        I/O board, Ebus slot 3: IO4 revision 1
        VME bus: adapter 13
        VME bus: adapter 0 mapped to adapter 13
        EPC external interrupts
   
    root@Drina:/# /usr/gfx/gfxinfo
        Graphics board 0 is "REV" graphics.
            Managed (":0.0") 1280x1024
            Display 1280x1024 @ 72Hz
            12 GE (GE10 rev. 0x7)
            2 RM5 boards
            Medium pixel depth
            10-bit RGBA pixels
            Not using Multi-Channel Option

SGI Origin 200
    Two Origin 200 system craylinked together:
    3x R10000 225Mhz 2Mb cache 
    1408Mb memory
    18Gb + 73Gb scsi disk
    4x 9Gb as a "large" 36Gb raid 0 array
    dds2 tape drive
    32x scsi cdrom
    sgi pci gigabit interface (fibre)
    2x sgi pci qla1040 UW scsi controller (one se, one differential)
    sgi pci fastethernet interface
    Irix 6.5.30
    hostname Lydia

$ hinv -vm
Location: /hw/module/1/slot/MotherBoard/node
  PIMM_225_2M_2P Board: barcode JRW408     part 013-2382-003 rev  A
Location: /hw/module/1/slot/MotherBoard/node/xtalk/8
            IP29 Board: barcode KAC027     part 030-1389-001 rev  B
Location: /hw/module/1/slot/MotherBoard/node/xtalk/8/pci/2
Location: /hw/module/1/slot/MotherBoard/node/xtalk/8/pci/5
        PCI_ENET Board: barcode HLP843     part 030-1155-002 rev  D
Location: /hw/module/2/slot/MotherBoard/node
  PIMM_225_2M_1P Board: barcode HXM593     part 013-2381-002 rev  B
Location: /hw/module/2/slot/MotherBoard/node/xtalk/8
            IP29 Board: barcode HXN190     part 030-1389-001 rev  A
Location: /hw/module/2/slot/MotherBoard/node/xtalk/8/pci/2
3 225 MHZ IP27 Processors
CPU: MIPS R10000 Processor Chip Revision: 3.4
FPU: MIPS R10010 Floating Point Chip Revision: 3.4
CPU 0 at Module 1/Slot 1/Slice A: 225 Mhz MIPS R10000 Processor Chip (enabled)
  Processor revision: 3.4. Scache: Size 2 MB Speed 225 Mhz  Tap 0x9
CPU 1 at Module 1/Slot 1/Slice B: 225 Mhz MIPS R10000 Processor Chip (enabled)
  Processor revision: 3.4. Scache: Size 2 MB Speed 225 Mhz  Tap 0x9
CPU 2 at Module 2/Slot 2/Slice A: 225 Mhz MIPS R10000 Processor Chip (enabled)
  Processor revision: 3.4. Scache: Size 2 MB Speed 225 Mhz  Tap 0x9
Main memory size: 1408 Mbytes
Instruction cache size: 32 Kbytes
Data cache size: 32 Kbytes
Secondary unified instruction/data cache size: 2 Mbytes
Memory at Module 1/Slot 1: 1024 MB (enabled)
  Bank 0 contains 256 MB (Standard) DIMMS (enabled)
  Bank 1 contains 256 MB (Standard) DIMMS (enabled)
  Bank 2 contains 512 MB (Standard) DIMMS (enabled)
Memory at Module 2/Slot 2: 384 MB (enabled)
  Bank 0 contains 64 MB (Standard) DIMMS (enabled)
  Bank 1 contains 64 MB (Standard) DIMMS (enabled)
  Bank 2 contains 256 MB (Standard) DIMMS (enabled)
Integral SCSI controller 3: Version QL1040B (rev. 2), single ended
  Disk drive: unit 1 on SCSI controller 3 (unit 1)
  Disk drive: unit 2 on SCSI controller 3 (unit 2)
  Disk drive: unit 3 on SCSI controller 3 (unit 3)
Integral SCSI controller 0: Version QL1040B (rev. 2), single ended
  Disk drive: unit 1 on SCSI controller 0 (unit 1)
  Disk drive: unit 2 on SCSI controller 0 (unit 2) (XVM Local Disk) (primary path)
  Disk drive: unit 3 on SCSI controller 0 (unit 3) (XVM Local Disk) (primary path)
Integral SCSI controller 1: Version QL1040B (rev. 2), single ended
  CDROM: unit 4 on SCSI controller 1
Integral SCSI controller 4: Version QL1040B (rev. 2), single ended
  Tape drive: unit 4 on SCSI controller 4: DAT
Integral SCSI controller 5: Version QL1040B (rev. 2), single ended
Integral SCSI controller 2: Version QL1040B (rev. 2), differential
IOC3/IOC4 serial port: tty1
IOC3/IOC4 serial port: tty3
IOC3/IOC4 serial port: tty2
IOC3/IOC4 serial port: tty4
IOC3 parallel port: plp1
IOC3 parallel port: plp2
Integral Fast Ethernet: ef0, version 1, module 1, slot MotherBoard, pci 2
Fast Ethernet: ef2, version 1, module 2, slot MotherBoard, pci 2
Fast Ethernet: ef1, version 1, module 1, slot MotherBoard, pci 5
Gigabit Ethernet: eg0, module 1, PCI slot 7, firmware version 0.0.0
Origin 200 base I/O, module 1 slot 1
Origin 200 base I/O, module 2 slot 2
  PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 2
  PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 2
  PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 0
  PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 0
  PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 1
  PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 1
  PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 5
  PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 5
  PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 6
  PCI Adapter ID (vendor 0x10a9, device 0x0009) PCI slot 7
IOC3/IOC4 external interrupts: 1
IOC3/IOC4 external interrupts: 2
HUB in Module 1/Slot 1: Revision 5 Speed 90.00 Mhz (enabled)
HUB in Module 2/Slot 2: Revision 5 Speed 90.00 Mhz (enabled)
IP27prom in Module 1/Slot n1: Revision 6.156
IP27prom in Module 2/Slot n2: Revision 6.156

SGI 4D/320 VGX "Twin Tower" powering up, other image
    2x R3000 33Mhz 256K cache
    56Mb memory
    1Gb scsi disk
    VGX graphic subsystem
    Twin Tower 15 slot chassis
    Irix 5.2

    $ hinv
        2 33 MHZ IP7 Processors
        FPU: MIPS R2010A/R3010 VLSI Floating Point Chip Revision: 3.0
        CPU: MIPS R2000A/R3000 Processor Chip Revision: 3.0
        On-board serial ports: 2 per CPU board
        Data cache size: 64 Kbytes
        Instruction cache size: 64 Kbytes
        Secondary data cache size: 256 Kbytes
        Main memory size: 56 Mbytes
        I/O board, slot F: IO2 revision 2
        VGX Graphics option installed
        Integral Ethernet: et0, IO2
        Tape drive: unit 2 on SCSI controller 0: 8mm(8500) cartridge
        Disk drive: unit 1 on SCSI controller 0
        Integral SCSI controller 0: Version WD33C93A, revision 9
        VME bus: adapter 0

    $ /usr/gfx/gfxinfo
        Graphics board 0 is "VGX" graphics.
            Managed (":0.0") 1280x1024
            10 spans,       IMP3
            EV mask = 0x0
            1 screen(s) on this pipe
SGI Octane2
    R12000 400Mhz 2Mb cache
    1024Mb memory
    36Gb 10k rpm scsi disk (Fujitsu MAF3364LC)
    Odyssey V6
    Irix 6.5.30
    hostname Morna
   
root@Morna:/# hinv -vm
Location: /hw/node
      PM10400MHZ Board: barcode LKH435     part 030-1475-001 rev  C
Location: /hw/node/xtalk/15
            IP30 Board: barcode FLP843     part 030-1467-001 rev  B
Location: /hw/node/xtalk/15/pci/2
             FP1 Board: barcode LPG261     part 030-0891-003 rev  H
    PWR.SPPLY.ER Board: barcode AAE0470506 part 060-0035-002 rev  A
Location: /hw/node/xtalk/11
           ODY32 Board: barcode LDP146     part 030-1403-003 rev  B
1 400 MHZ IP30 Processor
Heart ASIC: Revision F
CPU: MIPS R12000 Processor Chip Revision: 3.5
FPU: MIPS R12010 Floating Point Chip Revision: 0.0
Main memory size: 1024 Mbytes
Xbow ASIC: Revision 1.4
Instruction cache size: 32 Kbytes
Data cache size: 32 Kbytes
Secondary unified instruction/data cache size: 2 Mbytes
Integral SCSI controller 0: Version QL1040B (rev. 2), single ended
  Disk drive: unit 1 on SCSI controller 0 (unit 1)
Integral SCSI controller 1: Version QL1040B (rev. 2), single ended
IOC3/IOC4 serial port: tty1
IOC3/IOC4 serial port: tty2
IOC3 parallel port: plp1
Graphics board: V6
Integral Fast Ethernet: ef0, version 1, pci 2
Iris Audio Processor: version RAD revision 12.0, number 1
  PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 2
  PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 0
  PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 1
  PCI Adapter ID (vendor 0x10a9, device 0x0005) PCI slot 3

root@Morna:/# /usr/gfx/gfxinfo -v
Graphics board 0 is "ODYSSEY" graphics.
    Managed (":0.0") 1600x1200
    BUZZ version A.1
    PB&J version 1
    32MB memory
        Banks: 2, CAS latency: 3
     Monitor 0 type: Unknown
    Input Sync: Voltage - Video Level; Source - Internal; Genlocked - False
    Channel 0:
     Origin = (0,0)
     Video Output: 1600 pixels, 1200 lines, 75.00Hz (1600x1200_75)
     Video Format Flags:  (none)
     Sync Disabled
     Using Gamma Map 0

SGI Octane - sold
    R12000 360Mhz 1Mb cache (single r10k 225Mhz module upgraded with a r12k 300Mhz cpu clocked at 360Mhz)
    1024Mb memory
    18Gb scsi disk
    ESSI 24bit graphic board
    Irix 6.5.30
    screenshot

    root@Morna:/# hinv
        1 360 MHZ IP30 Processor
        CPU: MIPS R12000 Processor Chip Revision: 2.4
        FPU: MIPS R12010 Floating Point Chip Revision: 0.0
        Main memory size: 1024 Mbytes
        Xbow ASIC: Revision 1.3
        Instruction cache size: 32 Kbytes
        Data cache size: 32 Kbytes
        Secondary unified instruction/data cache size: 1 Mbyte
        Integral SCSI controller 0: Version QL1040B (rev. 2), single ended
           Disk drive: unit 1 on SCSI controller 0
        Integral SCSI controller 1: Version QL1040B (rev. 2), single ended
          CDROM: unit 6 on SCSI controller 1
        IOC3/IOC4 serial port: tty1
        IOC3/IOC4 serial port: tty2
        IOC3 parallel port: plp1
        Graphics board: ESSI
        Integral Fast Ethernet: ef0, version 1, pci 2
        Iris Audio Processor: version RAD revision 12.0, number 1
 
    root@Morna:/# /usr/gfx/gfxinfo
        Graphics board 0 is "IMPACTSR" graphics.
            Managed (":0.0") 1280x1024
            Product ID 0x3, 2 GE, 2 RE, 0 TRAMs
            MGRAS revision 4, RA revision 0
            HQ rev B, GE12 rev A, RE4 rev C, PP1 rev H,
            VC3 rev A, CMAP rev F, Heart rev E
            unknown, assuming 19" monitor (id 0xf)

            Channel 0:
             Origin = (0,0)
             Video Output: 1280 pixels, 1024 lines, 75.92Hz (1280x1024_76)

SGI O2
    R12000 300Mhz 1Mb cache  (original r10k 250Mhz upgraded with an r12k 300Mhz cpu processor)
    256Mb memory
    18Gb scsi disk
    32x scsi cdrom
    Audio-Video module
    Irix 6.5.29
    hostname Cassandra

    Cassandra 3# hinv
        CPU: MIPS R12000 Processor Chip Revision: 2.4
        FPU: MIPS R12010 Floating Point Chip Revision: 0.0
        1 300 MHZ IP32 Processor
        Main memory size: 256 Mbytes
        Secondary unified instruction/data cache size: 1 Mbyte on Processor 0
        Instruction cache size: 32 Kbytes
        Data cache size: 32 Kbytes
        FLASH PROM version 4.14
        Integral SCSI controller 0: Version ADAPTEC 7880
          Disk drive: unit 2 on SCSI controller 0 (unit 2)
          CDROM: unit 4 on SCSI controller 0
        Integral SCSI controller 1: Version ADAPTEC 7880
        On-board serial ports: tty1
        On-board serial ports: tty2
        On-board EPP/ECP parallel port
        CRM graphics installed
        Integral Ethernet: ec0, version 1
        Iris Audio Processor: version A3 revision 0
          PCI Adapter ID (vendor 36868, device 32888) pci slot 1
          PCI Adapter ID (vendor 36868, device 32888) pci slot 2
        Video: MVP unit 0 version 1.4
        AV: AV1 Card version 1, Camera not connected.
        Vice: TRE

    Cassandra 9# /usr/gfx/gfxinfo
        Graphics board 0 is "CRM" graphics.
            Managed (":0.0") 1280x1024
            32 bitplanes
            board revision 2, CRM revision C, GBE revision B
             Monitor 0 type: Unknown
            Channel 0:
             Origin = (0,0)
             Video Output: 1280 pixels, 1024 lines, 75.03Hz (1280x1024_75)
             Video Format Flags:  (none)
             Sync Disabled
             Using Gamma Map 0
             Monitor Type:  unknown


SGI O2
    R5000 180Mhz 512Kb cache
    160Mb memory
    4.5Gb scsi disk
    32x scsi cdrom
    audio module
    Linux Debian Sarge 3.1
    hostname Erwin

    > hinv
                   System: IP32
                Processor: 200 Mhz R5000, with FPU
     Primary I-cache size: 32 Kbytes
     Primary D-cache size: 32 Kbytes
     Secondary cache size: 512 Kbytes
              Memory size: 160 Mbytes
                 Graphics: CRM, Rev C
                    Audio: A3 version 1
                SCSI Disk: scsi(0)disk(1)
               SCSI CDROM: scsi(0)cdrom(4)


    erwin:~# cat /proc/cpuinfo
    system type             : SGI O2
    processor               : 0
    cpu model               : R5000 V2.1  FPU V1.0
    BogoMIPS                : 198.14
    wait instruction        : yes
    microsecond timers      : yes
    tlb_entries             : 48
    extra interrupt vector  : no
    hardware watchpoint     : no
    ASEs implemented        :
    VCED exceptions         : not available
    VCEI exceptions         : not available


SGI Indigo 2 Teal
    R4400 200Mhz 2Mb cache
    256Mb memory
    9Gb scsi disk + 4x scsi external cdrw
    GR3-Elan 24 bit 3D accelerated graphic board
    3Com 3c597 eisa fastethernet card
    Irix 6.5.22f
    hostname Nancy

    root@Nancy:/# hinv
        CPU: MIPS R4400 Processor Chip Revision: 6.0
        FPU: MIPS R4000 Floating Point Coprocessor Revision: 0.0
        1 200 MHZ IP22 Processor
        Main memory size: 256 Mbytes
        Secondary unified instruction/data cache size: 2 Mbytes on Processor 0
        Instruction cache size: 16 Kbytes
        Data cache size: 16 Kbytes
        Integral SCSI controller 0: Version WD33C93B, revision D
          Disk drive: unit 1 on SCSI controller 0
        Integral SCSI controller 1: Version WD33C93B, revision D
        On-board serial ports: 2
        On-board bi-directional parallel port
        Graphics board: GR3-Elan
        Integral Ethernet: ec0, version 1
        Iris Audio Processor: version A2 revision 1.1.0
        EISA bus: adapter 0

    root@Nancy:/# /usr/gfx/gfxinfo
        Graphics board 0 is "GR2" graphics.
            Managed (":0.0") 1280x1024
            4 GEs, 1 RE, 24 bitplanes, 4 auxplanes, 4 cidplanes, Z-buffer
            GR2 revision 4, VB2.0
            HQ2.1 rev A, GE7 rev B,  RE3.1 rev A, VC1 rev B, MC rev C
            19" monitor

SGI Indigo 2 Purple
    R4400 200Mhz 2Mb cache
    128Mb memory
    2Gb scsi disk
    Solid IMPACT 24 bit 3D accelerated graphic board
    Irix 6.2

    $ hinv                                                                         
        Iris Audio Processor: version A2 revision 1.1.0                                
        1 200 MHZ IP22 Processor                                                       
        FPU: MIPS R4000 Floating Point Coprocessor Revision: 0.0                       
        CPU: MIPS R4400 Processor Chip Revision: 6.0                                   
        On-board serial ports: 2                                                       
        On-board bi-directional parallel port                                          
        Data cache size: 16 Kbytes                                                     
        Instruction cache size: 16 Kbytes                                              
        Secondary unified instruction/data cache size: 2 Mbytes on Processor 0         
        Main memory size: 128 Mbytes                                                   
        EISA bus: adapter 0                                                            
        Integral Ethernet: ec0, version 1                                              
        Integral SCSI controller 1: Version WD33C93B, revision D                       
        Integral SCSI controller 0: Version WD33C93B, revision D                       
            Disk drive / removable media: unit 2 on SCSI controller 0                  
          Disk drive: unit 1 on SCSI controller 0                                      
        Graphics board: Solid Impact                           

    $ /usr/gfx/gfxinfo                                                             
        Graphics board 0 is "IMPACT" graphics.                                         
            Managed (":0.0") 1280x1024                                             
            Product ID 0x1, 1 GE, 1 RE, 0 TRAMs                                    
            MGRAS revision 1, RA revision 0                                        
            HQ rev A, GE11 rev B, RE4 rev A, PP1 rev A,                            
            VC3 rev A, CMAP rev E, MC rev C                                        
            unknown, assuming 19" monitor (id 0xf)     

SGI Challenge M
    R4400 150Mhz 1Mb cache
    96Mb memory
    2Gb scsi disk
    Irix 6.2
    hostname Zeena

    root@Zeena:/# hinv
        1 150 MHZ IP22 Processor
        FPU: MIPS R4000 Floating Point Coprocessor Revision: 0.0
        CPU: MIPS R4400 Processor Chip Revision: 5.0
        On-board serial ports: 2
        On-board bi-directional parallel port
        Data cache size: 16 Kbytes
        Instruction cache size: 16 Kbytes
        Secondary unified instruction/data cache size: 1 Mbyte on Processor 0
        Main memory size: 96 Mbytes
        EISA bus: adapter 0
        Integral Ethernet: ec0, version 1
        Integral SCSI controller 1: Version WD33C93B, revision D
        Integral SCSI controller 0: Version WD33C93B, revision D
          Disk drive: unit 2 on SCSI controller 0

SGI Indy
    R5000 150Mhz 512k cache
    256Mb memory
    4.5Gb scsi disk
    XZ 24 bit 3D accelerated graphic board
    Irix 6.5.22f
    hostname Lilith

    root@Lilith:/# hinv
        CPU: MIPS R5000 Processor Chip Revision: 2.1
        FPU: MIPS R5000 Floating Point Coprocessor Revision: 1.0
        1 150 MHZ IP22 Processor
        Main memory size: 256 Mbytes
        Secondary unified instruction/data cache size: 512 Kbytes on Processor 0
        Instruction cache size: 32 Kbytes
        Data cache size: 32 Kbytes
        Integral SCSI controller 0: Version WD33C93B, revision D
          Disk drive: unit 1 on SCSI controller 0
        On-board serial ports: 2
        On-board bi-directional parallel port
        Graphics board: GR3-XZ
        Integral Ethernet: ec0, version 1
        Integral ISDN: Basic Rate Interface unit 0, revision 1.0
        Iris Audio Processor: version A2 revision 4.1.0
        Vino video: unit 0, revision 0, IndyCam not connected

    root@Lilith:/# /usr/gfx/gfxinfo
        Graphics board 0 is "GR2" graphics.
            Managed (":0.0") 1280x1024
            4 GEs, 1 RE, 24 bitplanes, 4 auxplanes, 4 cidplanes, Z-buffer
            GR2 revision 4, VB2.0
            HQ2.1 rev A, GE7 rev B,  RE3.1 rev A, VC1 rev B, MC rev C
            unknown, assuming 19" monitor

SGI Challenge S
    R4400 150Mhz 1Mb cache
    96Mb memory
    4,5Gb scsi disk
    Irix 6.2
    hostname lize

    root@lize:/# hinv
        1 150 MHZ IP22 Processor
        FPU: MIPS R4010 Floating Point Chip Revision: 0.0
        CPU: MIPS R4400 Processor Chip Revision: 5.0
        On-board serial ports: 2
        On-board bi-directional parallel port
        Data cache size: 16 Kbytes
        Instruction cache size: 16 Kbytes
        Secondary unified instruction/data cache size: 1 Mbyte
        Main memory size: 96 Mbytes
        Integral ISDN: Basic Rate Interface unit 0, revision 1.0
        Integral Ethernet: ec3, version 1
        Integral Ethernet: ec0, version 1
        Integral SCSI controller 5: Version WD33C95A, differential, revision 0
        Integral SCSI controller 4: Version WD33C95A, differential, revision 0
        Integral SCSI controller 0: Version WD33C93B, revision D
          Disk drive: unit 2 on SCSI controller 0
          Disk drive: unit 1 on SCSI controller 0

Control Data Cyber 910-200 (SGI Indigo)
    R3000 33Mhz
    96Mb memory
    1Gb scsi disk
    XS24Z 24bit graphic board
    Irix 5.3
    hostname Loreley
   
    root@Loreley:/# hinv
        1 33 MHZ IP12 Processor
        FPU: MIPS R3010A VLSI Floating Point Chip Revision: 4.0
        CPU: MIPS R3000A Processor Chip Revision: 3.0
        On-board serial ports: 2
        On-board bi-directional parallel port
        Data cache size: 32 Kbytes
        Instruction cache size: 32 Kbytes
        Main memory size: 96 Mbytes
        Integral Ethernet: ec0, version 0
        Integral SCSI controller 0: Version WD33C93A, revision 9
          Disk drive: unit 1 on SCSI controller 0
        Iris Audio Processor: revision 3
        Graphics board: GR2-XS24 with Z-buffer

    root@Loreley:/# /usr/gfx/gfxinfo
        Graphics board 0 is "GR2" graphics.
            Managed (":0.0") 1280x1024
            1 GE, 1 RE, 24 bitplanes, 4 auxplanes, 4 cidplanes, Z-buffer           
            GR2 revision 2, VB1.1                                                  
            HQ2 rev A, GE7 rev B,  RE3 rev D, VC1 rev B, PIC rev 1.5                   
            unknown, assuming 19" monitor               


SGI Iris Indigo
    R4400 150Mhz 1Mb cache
    128Mb memory
    2Gb scsi disk
    Elan 24bit graphic board
    Irix 6.2
    hostname Nara

    Nara 3# hinv                                                               
        1 150 MHZ IP20 Processor                                                       
        FPU: MIPS R4000 Floating Point Coprocessor Revision: 0.0                       
        CPU: MIPS R4400 Processor Chip Revision: 5.0                                   
        On-board serial ports: 2                                                       
        On-board bi-directional parallel port                                          
        Data cache size: 8 Kbytes                                                      
        Instruction cache size: 8 Kbytes                                               
        Secondary unified instruction/data cache size: 1 Mbyte on Processor 0          
        Main memory size: 128 Mbytes                                                    
        Integral Ethernet: ec0, version 1                                              
        Integral SCSI controller 0: Version WD33C93B, revision C                       
          CDROM: unit 6 on SCSI controller 0                                           
          Disk drive: unit 1 on SCSI controller 0                                      
        Iris Audio Processor: revision 10                                              
        Graphics board: GR2-Elan      

    Nara 5# /usr/gfx/gfxinfo -v                                                    
        Graphics board 0 is "GR2" graphics.                                            
            Managed (":0.0") 1280x1024                                             
            4 GE, 1 RE, 24 bitplanes, 4 auxplanes, 4 cidplanes, Z-buffer           
            GR2 revision 2, VB1.1                                                  
            HQ2 rev A, GE7 rev B,  RE3 rev D, VC1 rev B, MC rev B                  
            unknown, assuming 19" monitor